The Location Pro-Dim 10 is a versatile and portable single channel dimmer which can also be used for zero voltage switching of suitable loads. It features front panel mounted rotary level control, dimming/ switching selection rocker switch, mimic LED ‘power connected’ neon indicator and circuit breaker.
DMX512 option – this option will allow connection of DMX inputs via 3 or 5 pin XLRs or via a convenient RJ45 connector. The RJ45 connection also provides a +5V supply to external equipment such as the Anyscene or AMD range of Anytronics DMX controls. The DMX address is set on the three bcd switches. An address of zero will disable the DMX input. Addresses between 512 and 799 are interpreted as address 512. Addresses above 799 will be ignored.
Internal DIL switch options If problems are encountered when dimming loads connected via electronic transformers, switch DIL switch 1 to ON for better compatibility with this type of load.
For a smooth output response, the normal dimming response time with DIL switch 2 OFF is approximately 100 mS. By switching DIL switch 2 ON this response time can be extended to one second in order to diminish the thermal shock applied to large incandescent loads. Such loads should ideally have a measure of preheat set as well so that lamp filaments remain warm and in a high impedance state.